Pronext, a.s.

J. A. Bati 5263, 76001 Zlín, CZ

Czech (CZ)Anglicky (EN)

Lubrication of Rests

mazacioperek.jpgThe equipment serves for lubricating the rods of headrests for passenger cars and trucks.

Technical parameters

 

(These serve only for information. They can be amended on agreement before ordering.)

  • Adjustable pitch of arms: 90 – 150 mm
  • Arms need not be parallel: changes of pitch along the length of the arms up to 1 cm 
  • Arms diameter: 14 mm 
  • Straight arms or R 1200 +/- 100 mm 
  • Length of arms : 170 – 270 mm 
  • Necessary force for pull-out of rest from equipment less than 50 N 
  • Volume of oil charge: 0,131 – 1,31 cm3/during 1 cycle per arm 
  • Scanning of oil level in the oil tank 
  • Recirculation of oil through the mesh filter 
  • Take-off of the end position of the arms 
  • Setting of time for application of oil to the arm (coat along the circumference) 
  • Acoustic and light signaling for extraction of rest (after application of oil) 
  • Distinctive acoustic and light signaling for late/untimely pulling out of the rest 
  • Control and management of functions via PLC 
  • Max. input to equipment: 50W 
  • Supply voltage 230 V/ AC 
  • Input of pressure air necessary

 


 

Pronext, a.s. -  J. A. Bati 5263 (Area Svit - building 33), Zlin 760 01, Czech Republic  -  Phone: +420 577 523 581


Copyright ©2014